Find us on Facebook
Search for
Products
Back to Listing | LEVEL MEASUREMENT > ABB Buoyancy Level Switch MS50
ABB Buoyancy Level Switch MS50
ABB Buoyancy Level Switch MS50
ABB-MS50
Buoyancy Level Switch MS50
The MS50 is used for top of tank mounting. The MS50 has a 316SS float, 316SS rigid float and two switches for high and low detection. Typical applications where the MS50 is used are butane, propane, oil, chlorine, acids, water and interfaces.

Overview
The K-TEK MS50 consists of latching reed switches totally enclosed in a stainless steel chamber (other materials available) and a float containing a magnet in which the switches will detect. The sensing element (chamber) and the float are normally inserted into the tank through a top process connection and can be mounted to the tank via flange, if desired. However, the unit can usually be mounted via a single 2" MNPT process connection. In addition, the float can generally be installed thought the same 2" process connection. A stilling well may be required if the process liquid is in a turbulent state. The MS50 will provide for the detection of start/stop trip points of either total or interface level in virtually any vessel. These trip points can be used for alarms or to activate a pump motor starter relay.

Data
FEATURES
Up to six SPDT switches per unit (NO & NC Contacts)
Interface & total level capability
Trip point adjustable without removing vessel from service
Vibration resistant (Multi-Float option only)
Suitable for high temperature applications
316L stainless steel wetted parts standard
Field adjustable and replaceable switches
316/316L standard, exotic alloys & thermoplastic available
Terminal block(s) included

 
Copyright 2020 REX INSTRUMENTS SDN BHD