clear
PIE 521B 14-Type Thermocouple Calibrator

PIE 521B 14-Type Thermocouple Calibrator

Product Description

 
 
 
   
 
14 T/C Types Plus mV Source
 
The PIE 521B Thermocouple Source simulates standard thermocouple curves over the entire industrial temperature range. The PIE 521B provides precise temperatures for inputs to all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer systems. The PIE 521B has a miniature thermocouple connector on the top end for fast connections. The PIE 521B offers the highest performance and functions in its class by exceeding the accuracy and functions of many higher priced thermocouple calibrators

 

The low cost PIE 521B is an “easy as PIE” to use thermocouple source for checkout and calibration of all thermocouple instruments in the field, shop or control room.
 
  • Accuracy ±(0.015% of mV Setting + 0.009mV)
  • Calibrate in temperature for your T/C type
  • Adjustable temperature output in selectable 0.1°C or 0.1°F steps
  • Types J, K, E, T, R, S, B, N, G, C, D, L, U and mV
  • Typical accuracy of ±0.35°C (0.5°) for Type K
  • EZ-Dial™ knob easily adjust output by 0.1°C or 0.1°F
  • Three position EZ-Check™ switch for 0% and 100% span adjustments
  • Uses standard “AA” Alkaline Batteries
  • Superior battery life of 45 hours under typical continuous usage
  • Easy access to battery compartment
  • Lightweight and Rugged with a Solid Feel
  • Small and tough
  • Protected to 60V
  • Optional Rubber Boot, T/C Wire with miniature connector, and carrying case available
  • NIST Traceable Calibration Certificate included FREE
 
  • Continuously select output temperatures
    Works will all instrument ranges across the full range in degrees C & F. Not limited to 22 temperature steps!
  • Works with types J, K, E, T, R, S, B, N, G, C, D, L, U, or P
    One source replaces ALL the ranges for all T/C types of the Altek 22
  • Instantly select output three temperatures
    Flip the EZ-Check™ switch to calibrate zero, span and mid-point
  • LCD display with backlight
    Easy viewing in dark locations
  • More resistant to accidental damage
    Reconfigure without resetting calibrator
  • Includes Certificate of Calibration
    All PIE Calibrators come with a free signed and dated certificate. Altek calibrators come only with an unsigned Statement of Calibration Practices with a certificate of calibration available for an extra charge.